c
2020 Sun Hydraulics 1 of 5
MODEL
DJO
ISO 05 - X&Y: On P
CAVITY: T-16A
Check, On P, High Capacity
Flow Control, Meter-In P, High Capacity
TECHNICAL DATA
Body Type Sandwich
Interface ISO 05 - X&Y
Body Features On P
Stack Height 63 mm
Seal Plate Included (see notes) No
Open Cavities 1
Cavity T-16A
Model Weight 1.07 kg.
sunhydraulics.com/model/
DJO
NOTES
Stack height value in technical data table includes seal retainer plate.
This installation requires a retainer and seal kit which are purchased separately. See "Related Accessories" section.
For check valve application, use only with CX*A check valves - free flow nose to side.
Important: Carefully consider the maximum system pressure. The pressure rating of the manifold is dependent on the manifold material, with the port
type/size a secondary consideration. Manifolds constructed of aluminum are not rated for pressures higher than 3000 psi (210 bar), regardless of the port
type/size specified.
c
2020 Sun Hydraulics 2 of 5
1 2 3 4
5 6 7 8
9 10 11 12
INCLUDED COMPONENTS
Part Description Quantity
A330-006-006 SAE Plug 1
MODIFIER
6061-T651 Aluminum, Buna-N
/11 6061-T651 Aluminum, Buna-N, Clear Anodize - Per MIL
SPEC 8625F Type II, Class I
/10 6061-T651 Aluminum, Buna-N, Black Anodize - Per MIL
SPEC 8625F Type II, Class II
/V 6061-T651 Aluminum, Viton
/16 6061-T651 Aluminum, Viton, Clear Anodize - Per MIL
SPEC 8625F Type II, Class I
/15 6061-T651 Aluminum, Viton, Black Anodize - Per MIL
SPEC 8625F Type II, Class II
/S 65-45-12 Ductile Iron, Buna-N, Chem. Black
/S3 65-45-12 Ductile Iron, Buna-N, Trivalent Clear Zinc with
Top Sealer
/Y 65-45-12 Ductile Iron, Viton, Chem. Black
/Y3 65-45-12 Ductile Iron, Viton, Trivalent Clear Zinc with
Top Sealer
MANIFOLD FACES
FACE GRID
Face 2
Model Code Example: DJO
CONFIGURATION OPTIONS
c
2020 Sun Hydraulics 3 of 5
Face 6
c
2020 Sun Hydraulics 4 of 5
Face 7
Face 8
c
2020 Sun Hydraulics 5 of 5
Face 10
